Sonicwall Internet Security Appliances Manual de usuario descargar pdf (Pagina 268)

Appendices Page 269

Appendix E - Configuring TCP/IP Settings

The following steps describe how to configure the Management Station TCP/IP settings in order to

initially contact the SonicWALL. It is assumed that the Management Station can access the Internet

through an existing connection.

The SonicWALL is pre-configured with the IP address “192.168.168.168". During the initial

configuration, it is necessary to temporarily change the IP address of the Management Station to

one in the same subnet as the SonicWALL. For initial configuration, set the IP address of the

Management Station to "192.168.168.200".

Make a note of the Management Station's current TCP/IP settings. If the Management Station

accesses the Internet through an existing broadband connection, then the TCP/IP settings can be

helpful when configuring the IP settings of the SonicWALL.

Windows 98

1. From the Start list, highlight Settings and then select Control Panel.

2.Double-click the Network icon in the Control Panel window.

3.Double-click TCP/IP in the TCP/IP Properties window.

4.Select the Specify an IP Address radio button.

5.Enter "192.168.168.200" in the IP Address field.

6.Enter "255.255.255.0" in the Subnet Mask field.

7.Click DNS Configuration.

8.Enter the DNS IP address in the Preferred DNS Server field.

If you have more than one address, enter the second one in

the Alternate DNS server field.

9.Click OK, and then click OK again.

10.Restart the computer for changes to take effect.

1 2 ... 263 264 265 266 267 268 269 270 271 272 273 ... 292 293

Sin comentarios

Sonicwall Internet Security Appliances Manual de usuario Pagina 268